Amps
[Top] [All Lists]

[AMPS] Finding the Q of a Coil

To: <amps@contesting.com>
Subject: [AMPS] Finding the Q of a Coil
From: Ian White, G3SEK" <g3sek@ifwtech.com (Ian White, G3SEK)
Date: Sun, 7 Oct 2001 16:43:13 +0100
Phil (VA3UX) wrote:
>
>At 08:43 PM 10/6/2001 -0700, Bill Smith wrote:
>
>>Q of this coil should be the Inductive Reactance
>>divided by the internal resistance of the coil's wire
>>(factoring in the RF).  This is where I got bogged
>>down.  Couldn't come up with an appropiate number.
>>Where am I going wrong?
>
>Accurate calculation of RF resistance definitely is the tough part.  
>There is more than one set of formulas from different sources for 
>calculating this and the results don't agree. If I were forced to 
>choose, I'd probably stick with the formulae in Terman's books.   Steve 
>T. correctly outlined the general procedure.  I too will have a look at 
>the Murphy file that Ian suggested.
>
I should have mentioned, it's all based on info from Terman.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.com/g3sek

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>