Amps
[Top] [All Lists]

[AMPS] SB-200 & 10MHz

To: <amps@contesting.com>
Subject: [AMPS] SB-200 & 10MHz
From: ku7i@hotmail.com (Lane Zeitler)
Date: Thu, 13 Dec 2001 12:42:12 -0800
>//   10MHz requires a bandswitch with an additional contact because 10MHz
>is too far from from 7MHz or 14MHz to allow sharing bands -- such as
>12m/10m.

Very untrue. The SB-200 will tune up quite nicely on 30 meters in stock 
form, just like it does on 17 and 12 using the 15 and 10 meter band spots. I 
do not remember which band was better, 7 or 14 mhz, but she will tune up 
there with ease.

Lane
Ku7i

>
> >Any instruction available? Also interested to add
> >1,8MHz. All hints are very welcome!
> >
>//  1.8MHz is difficult to add to a SB-200 because, unlike the SB-220,
>there is not much room for the added L, Tune-C, and Load-C padders.
>
>cheerio, Jukka
>
>-  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
>end
>
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/amps
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>




_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>