Amps
[Top] [All Lists]

[AMPS] Two-tone audio generator for testing IMD?

To: <amps@contesting.com>
Subject: [AMPS] Two-tone audio generator for testing IMD?
From: alex@sandlabs.com (alex)
Date: Mon, 17 Dec 2001 07:11:22 -0500
This is not the _standard_ way for a IMD test ...

Alex

===================================
If we can accept the notion that GUNS are
the killers and not the people, why is it that
we can not accept the idea that CARS are
the speeders and not the drivers?

Alex, trying to understand the world around.

==================================.

----- Original Message -----
From: "Jerry Flanders" <jflanders2@home.com>
To: "alex" <alex@sandlabs.com>; " AMPS" <amps@contesting.com>
Sent: Sunday, December 16, 2001 7:05 PM
Subject: Re: [AMPS] Two-tone audio generator for testing IMD?


> When my rig gets a chance to convert those audio freqs to 14 MHz, they
> _become_ RF.
>
> My detected audio from the other rig (receiver) feeds an audio analyzer. I
> check baseline IMD from rig alone, then rig plus amp. Diff is amp. Right?
>
> Jerry W4UK
>
> At 05:39 AM 12/17/2001 -0500, alex wrote:
> >A two tone IMD test on an RF amp does _not_ use audio frequency!
> >
> >For your test use two RF generators. One set for 30.000.00MHz
> >the other set to 30.001.00 MHz. Look at the output with an
> >Spectrum analyser.
> >
> >
> >Alex
> >===================================
> >If we can accept the notion that GUNS are
> >the killers and not the people, why is it that
> >we can not accept the idea that CARS are
> >the speeders and not the drivers?
> >
> >Alex, trying to understand the world around.
> >
> >==================================.
> >
> >----- Original Message -----
> >From: "Jerry Flanders" <jflanders2@home.com>
> >To: <amps@contesting.com>
> >Sent: Sunday, December 16, 2001 5:09 PM
> >Subject: [AMPS] Two-tone audio generator for testing IMD?
> >
> >
> > >
> > > Is software available for the PC sound card to generate two audio
tones
> >for
> > > doing some IMD tests on this 5CX3000A amp that is slowly taking shape
> >here?
> > >
> > > Since the driving rig is already interfaced to the PC's sound card, I
> > > _think_ all I need to generate tests is a piece of software to
generate
> >the
> > > tones (along with my other rig and other PC to view the spectrum with
its
> > > own sound card and software).
> > >
> > > Know of any dual-tone generating software cheap/free? Used it for this
> > > purpose? If no dual-tone software, what single-tone software is
available?
> > > (I have two sound cards in this PC and guess I could mix externally.)
> > >
> > > Jerry W4UK
> > >
> > >
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>