Amps
[Top] [All Lists]

[AMPS] SB-220 parts needed

To: <amps@contesting.com>
Subject: [AMPS] SB-220 parts needed
From: 2@mail.vcnet.com (rich)
Date: Fri, 1 Feb 2002 03:38:34 -0800


>
>Hi Gang:
>I should get this thing going. But first, I need:
>
>Filament xfmr, p/n 54-238

When a tube grid/fil. shorts in a SB-220, the unfused 5v filament/relay 
110v PS transformer usually melts down.  To prevent this possibility with 
the new transformer, convert the cutoff bias method from voltage-cutoff 
to resistor-cutoff,  [see article on my Web site]

>Multimeter,    p/n 407-146
>(I think the plate current meter, p/n 407-145, has the same specs)
>
They are both 200uA movements.  The same movement was also used in other 
Heathkits.  

>...

good luck, Ralph

-  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>