Amps
[Top] [All Lists]

[AMPS] mof resistors

To: <amps@contesting.com>
Subject: [AMPS] mof resistors
From: 2@mail.vcnet.com (Richard)
Date: Sat, 23 Feb 2002 07:18:41 -0800


>
>I am open to correction on this (Eu members should be able to confirm) but I
>think the standard Phillips product resistors are metal film and very
>stable.

Higher values of R may be carbon film.  Values under 10? are typically 
metal film.  10? - 100k? are usually metal oxide film. 

 Unless one performs a 1-hour overload test, "think" = guess. 

 For some applications, intrinsic L is important.  An example would be 
VHF/UHF parasitic suppressor service.  For suppressor service, >15nH is 
probably not good engineering practice.  Measuring intrinsic L is not 
easy.  A 50W "non-inductive" Globar typically has c. 60nH - - - but so 
does 15mm copper tubing of the same length.

cheers, Barry

-  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>