Amps
[Top] [All Lists]

[Amps] Equalizing resistors

To: <amps@contesting.com>
Subject: [Amps] Equalizing resistors
From: willy@global2000.net (Bill Russell)
Date: Sat, 02 Mar 2002 20:00:27 -0500
This is the second time I tried posting this message.

Richard,
If I understand you, I can remove the swinging choke leaving just the 25mfd 
cap as the hv filter. If the high voltage then rises to about 3kv instead 
of the normal 2.2 kv, I would have to change the screen voltage and the 
grid voltage proportionally to maintain the proper operation of the 2 
4-400's. Is this a correct assumption?
BTW....I understand that the 4-400's would run better with 3kv

Thanks in advance,
Bill KC2IFR

Bill Russell


<Prev in Thread] Current Thread [Next in Thread>