Amps
[Top] [All Lists]

[Amps] Terminology Question

To: <amps@contesting.com>
Subject: [Amps] Terminology Question
From: carlseye@tampabay.rr.com (carl seyersdahl)
Date: Thu, 21 Mar 2002 07:28:58 -0500
Mark is correct: I remember those letters well. when I was little (long time
back) many radios used batteries. They were always marked  A+...A-
(filament) ...  B+.... B- (hi voltage supply) and C was the bias supply.
Some radios didn't need the C battery. Generally , A-  and B- were tied
together internally and also C+ , as the bias supply was always
negative!!!!! AAAAAHHHHH!!!!!!
   memories!!
   carl / kz5ca
----- Original Message -----
From: <wb8jkr@juno.com>
To: <RMead100@aol.com>
Cc: <Amps@contesting.com>
Sent: Thursday, March 21, 2002 5:06 AM
Subject: Re: [Amps] Terminology Question


>   The B always stood for "B" battery or the higher
> voltage supply, and the "C" was the C battery
> was the bias source. I least that's what I remember it
> being, could be wrong. The "A" battery? dunno, maybe
> a filament supply?
>
> Mark  WB8JKR
>
>
> On Wed, 20 Mar 2002 20:51:03 EST RMead100@aol.com writes:
> >
> > What is the origin of the B+ term in amp/radio/power supply
> > terminology. I
> > understand it to be the high voltage supply, but I do not know the
> > origin of
> > the designation and that has finally bothered me at age 52. It seems
> > to me
> > the only voltage referred to with this type of
> > shorthand.........i.e. no A+
> > or -; no B-, no C + or -.
> >
> >
> > R Meadows
> > k8BUX
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
>
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today!  For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps


<Prev in Thread] Current Thread [Next in Thread>