Amps
[Top] [All Lists]

[Amps] 4-400G

To: <amps@contesting.com>
Subject: [Amps] 4-400G
From: 2@mail.vcnet.com (Richard)
Date: Mon, 8 Apr 2002 17:46:29 -0700
>         Please define a little less vacuum.  

Leakage c. 10uA @ 8kV instead of c 5uA @ 8kV.   The reason is that 
graphite tends to hide air molecules during pumping.  


>I don't have any experience 
>with Covimag's 4-400 tubes but I do with its bigger brother.
>If Covimag 4RP1000A's had a little less vacuum I'd expect they would not 
>pass the high voltage break down test.
>However, we find that they are great.  The biggest advantage of  the 
>Covimag 4PR1000A and 4-1000A tubes is that they
>have a very sturdy anode with a support that does not bend in shipping. 
>Most of the other brand tubes stand about
>a 50-50 chance of having the anode bent out of position when shipped by 
>USPS or UPS.


?   UPS blue/air is a bit better than brown/ground.

>         Graphite is a great high temperature material and has great black 
>body radiation properties.
>I have yet to see a good Triton manufactured 4-1000A or 4PR1000A. All that 
>I have checked NEW have either
>been gassy or low on emission or both. Sure miss the real EIMAC glass 
>tubes. I have advised the people I work with to get the Covimag 
>tubes.  They have not been disappointed yet.
>         But the worst thing is that Covimag is stuck is most likely stuck 
>with an single vendor contract with Richardson in the US and  Richardson 
>will push the poorer products produced by Covimag's competitor  rather than 
>selling Covimag's products. Even though they list both manufacturers if you 
>ask for a 4-1000A or 4PR1000A they will sell you the Triton product. 

?  A friend bought a Triton 3-500Z.  The anode spotwelds came loose and 
the anode cooler dropped down on the grounded-grid.   The cause of this 
malady is not enough amperes during the spotweld.  Eimacs 3-500Zs mfg in 
Utah suffered from the same error.  

>They 
>will sell you Covimag's product (AMPEREX) if you insist on it.
>
?  Eddie Richardson seems to be a megalomaniac.  His attempt to 
monopolize the distribution of Eimac tubes resulted in him being made an 
offer he could not refuse by the U. S. Justice Dept.  

cheers, Bill

>
>
>  They work well but they have a bit less vacuum
>>than the metal-anode version.
>>
>>cheers, John
>>
>>-  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
>>www.vcnet.com/measures.
>>end
>>
>>_______________________________________________
>>Amps mailing list
>>Amps@contesting.com
>>http://lists.contesting.com/mailman/listinfo/amps
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>


-  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
www.vcnet.com/measures.  
end


<Prev in Thread] Current Thread [Next in Thread>