>Conrad, why not use the Motorola MR-760 diodes. They
>are 1000 volts at 6
>amps. They mainly high pot around 1.5KV They sell for
>around .75 at Digikey.
>Put some matched resistors and matched capacitors and it
>will be bomb proof
>for everything but HV to gnd short.
? Put "equalizer" resistors/capacitors on a string of same-type Si
rectifiers and one increases the chance of failure.
>
>Denis Ve6AQ
>
>Conrad G0RUZ wrote:
>
>> Has anyone ever used the P600M diode in an HT supply, it looks like a good
>> choice, twice the current rating of the 1N5408. Any other recommendations
>> for a bomb proof rectifier stack? I was thinking of using 8 per leg in my
>> test supply which can do 5kV @ 1.75 amps.
>>
>> Conrad G0RUZ
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
|