If the IC draws 2mA and requires 6v, why not eliminate the regulator and
just use a 1.5k resistor in series?
WB2WIK/6
"Each success only buys an admission ticket to a more difficult problem." --
Henry Kissinger
> -----Original Message-----
> From: Roger D. Johnson [SMTP:n1rj@pivot.net]
> Sent: Thursday, May 02, 2002 6:10 PM
> To: Radio WC6W; amps@contesting.com
> Subject: Re: [Amps] Bird PEP board
>
> The mystery of the "Battery Eating Bird" has been solved! I drew
> out the circuit and found that each battery has a Zener shunt
> regulator circuit associated with it. A 6.2 volt Zener through
> a 150 ohm resistor! The damn regulator gobbles up about 18 ma
> to regulate 2ma for the IC! The engineer that designed this must
> have worked for Eveready.
> I'm wondering if this circuit really has to be regulated at all.
> If so, perhaps a low dropout series regulator would be much more
> efficient.
>
> 73, Roger
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|