Amps
[Top] [All Lists]

[Amps] Ameritron AL80B with the FT1000

To: <amps@contesting.com>
Subject: [Amps] Ameritron AL80B with the FT1000
From: 2@mail.vcnet.com (Richard)
Date: Wed, 15 May 2002 18:34:45 -0700
>Greetings,
>
>Anyone out there running the Ameritron AL80B with the FT1000 Mark V?  I 
>picked up one recently but haven't interfaced it with the rig yet.  I 
>noticed the Mark V book indicates that the gird current type ALC of 
>circuit used by the AL80B isn't the preferred method for the Mark V.  But 
>I suppose it should work.
>
>Any comments or suggestions?
>
?  Amplifier to transceiver ALC does not work as advertised.  The best 
solution is to set the transceiver output to a specific level.  To drive 
a 3-500Z to max  linear ability, use no more than c. 70w pep drive.  The 
info on the 3-500Z current rating in the AL-80 manual is not according to 
the tube manufacturer's specs.  The actual rating is 400mA (c.  150mA 
indicated with voice mod).  More than that generates rotten splatter.  

cheers, Ben


>W4TDX
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>  text/plain (text body -- kept)
>  text/html
>---
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>


-  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
www.vcnet.com/measures.  
end


<Prev in Thread] Current Thread [Next in Thread>