>> First, Ameritron does not use mica's in the tank of higher power
>> amplifiers. Never has, probably never will.
>>
>> They switched to ceramic chip capacitors because the doorknobs they
>> had used for years suddenly failed to meet temperature vs capacitance
>> change ratings when HEC starting using tooling or materials purchased
>> from ITT-Jennings.
>
>I stand corrected, everyone!
>I thought the Ameritron caps were mica...my mistake.
>
>I do know that every SB-1000 I have tuned up on 160 meters
>has the same drift problem. I have cured that problem on several
>occasions with the Ameritron CERAMIC chip caps. With
>a single 3-500Z, voltage is not a problem in the loading
>section of a PI-L tank as it would be with a legal-limit amp.
>They seem to be adequate. I see that the AL-1500 used 500pf
>door knobs . Do they still do?
[] 500pF 5kV doorkobs - such as the 58-series - are typically designed
for bypass service, not tuned-circuit service.
>...
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
|