Amps
[Top] [All Lists]

[Amps] Use of Regulated DC on Power Tubes Filaments

To: <amps@contesting.com>
Subject: [Amps] Use of Regulated DC on Power Tubes Filaments
From: w8ron@stratos.net (Ron)
Date: Wed, 09 Oct 2002 09:39:25 -0400
I remember doing life tests in filaments of lamps and when DC was used ,
it caused plating of the filament material from one side to the other
essentially plating the filament away on one side and causing an early
failure.
Use AC.
---
Ron


"Smith, Dave" wrote:
> 
> Friends,
> 
> What are the pro's / con's regarding using regulated DC to supply filament
> voltage for a PA in cathode driven, AB2 configuration? I need 7.5 volts @
> 51.5 amps and have available a HP regulated supply that is 0 - 10VDC @ 100
> amps. I would isolate the both neg and pos sides from chassis ground.
> 
> Thanks for your input.
> 
> Dave / W6TE
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>