OOPS. Should have said the voltage divider connects to the power transistor
base. You might try 3k in series to the base and 1k base to gnd . 73, Dan,
N5AR
----- Original Message -----
From: David Jones <djones449@cogeco.ca>
To: Amps Reflector <amps@contesting.com>
Sent: Tuesday, January 21, 2003 6:02 PM
Subject: [Amps] FT-990 keying TL-922?
> Hi all,
>
> This weekend, two of us will be keying a TL-922 (his) with an FT-990
(mine)
> for this one time only in the CQ160. Just want to be sure I'm reading the
> manual correctly....
>
> 1) What is the t/r keydown voltage and current on the TL-922 at the PTT
jack
> (and can the FT-990, rated at up to 50vdc and 500mA handle it - don't want
> to activate the internal relay for one weekend)?
> 2) Using the "remote" jack on the 990, and not worrying about QSK, would
pin
> 4 and pin 3 be the pins???
> Thanks... see you on 160m!
>
> David VE3STT
> ve3stt@rac.ca
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|