Thanks Bill
In 30 years I have never seen those available to the "normal" people like
us hams here in VK and I have never none anyone within my circle of ham friends
that have gotten hold of one let alone used one...but then again with our power
limit set to 400w pep i don't think there would ever be a call for them...but
you know i might even enquire as to the availability of a "junk" one from the
local electrical supply who has a storage depot about 2 miles up the road from
me and if i can get hold of one then at least i can have a play and see what
they are made of and maybe even scrounge some good wire out of it..I can't see
myself making a HV supply from it as I would have no need for that but wreck it
for the heck I will..
Thanks to all who replied to my query and I should have asked that question
many years ago when i first heard about a "pole pig" from your way but you know
how it is..dumb question = dumb operator...
Hopefully that way of thinking has changed
regards Rick
>snip
These pole transformers are often replaced when upgrading a
neighborhoods electrical distribution system. In the 60's and 70's they were
very often available
due to the fact that many homes started using air conditioning. The home owners
had to upgrade from
100 amp service to 200 or more to accommodate the power requirements of the air
conditioning.
Also, the utility companies had to replace the pole transformers and drops to
the homes with new larger capacity ones. So lots of them were available. Now
you find them mostly at ham fest and silent key sales. But there are still
neighborhoods that are requiring more energy due to the fact that in some areas
that have cheap electricity it is more economical to use heat pumps than gas.
Naturally the primary becomes the secondary and vice versa for a HV
transformer.
73
Bill wa4lav
At 03:33 AM 1/28/2003 +1100, you wrote:
>Bill Fuqua Wrote
>
> >snip
>3. The standard pole transformers which were popular for building power
>supplies from
> provide much more than 3KV unless you drop the input voltage down to
> 40 or 50 volts.
> >snip
>
>Please clarify my thinking here as to what you mean by "standard pole
>transformers"
>snip
|