Amps
[Top] [All Lists]

[Amps] Series Capacitor Strings in HV Supplies

To: <amps@contesting.com>
Subject: [Amps] Series Capacitor Strings in HV Supplies
From: conrad at g0ruz.net (Conrad G0RUZ)
Date: Thu Feb 27 17:25:36 2003
I am quite sure that you are correct Eric but I like to have some path for
the caps to discharge through and they do serve that purpose, mind you what
a waste of Energy. I also still short the supply with a screwdriver.

Regards

Conrad G0RUZ

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
Behalf Of MorgusMagnificen@aol.com
Sent: 27 February 2003 05:15
To: amps@contesting.com
Subject: [Amps] Series Capacitor Strings in HV Supplies


I have formulated a new theory which offers very convincing proof that the
traditional 'equalizing' resistors used with series-connected electrolytic
capacitor strings are NOT necessary. I realize that this contradicts the
prevailing wisdom, not to mention the design of hundreds of commercial amps
that have come and gone.

In lieu of just passing off what might be construed as idle speculation, I
have also done some meaningful practical work which supports my conclusion.
Specifically, I have been running 3 power supplies here over the last two
years with no resistors, one of them in my 'main' amplifier which is on the
air almost every day. To date, no sign of trouble. In addition, I have made
periodic spot checks of the voltage division between C's in each of the
supplies. Again, no unusual imbalances.

Now, I am preparing to make a public disclosure of my theory, which should
be
of interest to anyone building medium to high power amps. Stay tuned for
this.

Meanwhile, I would like to hear any meaningful anecdotal data which supports
the old belief: that without balance resistors, an imbalance in the leakage
currents can lead to destruction of some C's. There are plenty of cases
where
the resistors themself failed, which guarantees a destructive imbalance
(that
has happened to me). But has anyone ever seen or heard of a case where
'unequalized' capacitors blew? Unfortunately, few if any have ever dared to
even try it. The old myth was born many years ago and everyone is afraid to
question it.

Eric von Valtier K8LV
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


<Prev in Thread] Current Thread [Next in Thread>