Amps
[Top] [All Lists]

[Amps] Electronic Relay Use In RF Aplications

To: <amps@contesting.com>
Subject: [Amps] Electronic Relay Use In RF Aplications
From: vk3ym at iprimus.com.au (Rick Cole VK3YM)
Date: Thu Mar 6 06:52:30 2003
>Maybe he ment to use them in an amplifer for switching >AC such as filaments 
>or B+ but was concerned about >the effects RF may have on them..
>73
>Bill wa4lav

Yes..exactly what I should have asked...does the RF have any effect on them???
         Rick VK3YM

-----Original Message-----
From: Doug Hall <doug@nc.rr.com>
To: Rick Cole  VK3YM <vk3ym@primus.com.au>
To: <amps@contesting.com>
Date: Wed, 5 Mar 2003 21:59:56 -0500
Subject: Re: [Amps] Electronic Relay Use In RF Applications

These are usually designed to switch 60 Hz loads. They don't look like 
relays at RF. They generally have a fair amount of input/output 
capacitance.

I have a whole box of 'em too.

73,
Doug, K4DSP

On Wednesday, March 5, 2003, at 09:13 PM, Rick Cole VK3YM wrote:

> I am just wondering if anyone has used one of the solid state relays 
> for RF use...
> I have just aquired a boxful {over 100} of new ones from an 
> auction..they are all different types ranging from spst to spdt and 
> 10a to 100a and either 12-24-32v switching..
> I have never used these type of relays before due to the initial high 
> cost of them if purchased new..
>            Regards   Rick  VK3YM
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps




_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>