Amps
[Top] [All Lists]

[Amps] FT-890 & Swan1200X

To: <amps@contesting.com>
Subject: [Amps] FT-890 & Swan1200X
From: ki4ame at yahoo.com (Mike Bishop)
Date: Sun Jul 20 08:44:10 2003
I recently purchased a Swan1200X and I'm trying to hook it up to my Yaesu 
FT-890 , the Swan 1220X has the mod. so it will work on other radio besides the 
swan radios. It has a single wire coming out the back and that goes top +12vdc 
and I was also sent a 2 wire belden cable with red and black wires in it. I 
have put a RCA jack on one end of the belden cable and put that to TX Ground on 
my Yaesu FT-890 and the relay on the radio is working, on the other end of the 
belden cable I put the black wire to -12vdc but I can't figure out where to put 
the red wire on the other end of the belden cable. This is the hook up I was 
told to do by the person I purchased the amp from but I never could understand 
where to put the red wire thats on the other end of the belden cable. I'm 
attaching a drawing of the connections and maybe someone can steer me in the 
right direction and tell me how to key the relay in the amp.
 
 
73's de KI4AME



http://www.carc.cc/
KI4AME 
Mike Bishop 
P.O. Box 922 
Cleveland, TN. 37364




---------------------------------
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] FT-890 & Swan1200X, Mike Bishop <=