Jurgen van de Glind wrote:
I couple 2x AM6154 for >1KW the following way.
http://www.vandeglind.demon.nl/hybridring.htm
cheap and easy
Jurgen PE1LWT
Date: Mon, 19 Jan 2004 10:54:08 EST
From: JimMoci@aol.com
To: amps@contesting.com
Subject: [Amps] Power combiners and antennas???
Message-ID: <129.398aa569.2d3d57a0@aol.com>
Content-Type: text/plain; charset="US-ASCII"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Precedence: list
Message: 3
Hello fellow amp gurus- I have a question for the experts. I have two TE
systems 350 watt 2 meter solid state amplifiers and wanted to combine the
two.
What is the best way of doing this? Should I use a power combiner?
Reply: See previous post.
Should I
run
each amp into a seperate antenna with equal feedline lengths while driving
both
with the exciter simultaneously?
Reply: You would likely just end up with some strange non-symetrical
pattern.
Any other ideas, suggestions? Thanks for
any and all input.
73,
Jim
************************************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|