I get the feeling that some may have misunderstood my question about the
resistors.
I was referring specifically to the RF negative feedback resistors as used
in the ckts. per Mr. measures's pages.
IE; , two caps of .01 mf. each from the pi-net input ckt , to one each 10
ohm resistor on each side of the "filament ckt" of a G-G amp. (572b's) VS
using two ten ohm resistors in series from One .02 cap off the input ckt to
the "fil." or cathode (as the case may be) ...!!!
Rich::: maybe you are the one to answer this one.!!!
Please ????
carl / kz5ca
----- Original Message -----
From: <peter.chadwick@Zarlink.Com>
To: "carl seyersdahl" <carlseye@tampabay.rr.com>
Cc: <Amps@contesting.com>; <amps-bounces@contesting.com>
Sent: Monday, May 31, 2004 6:44 AM
Subject: Re: [Amps] feeding the input
>
>
>
>
> Carl was asking about feedback resistors in cathode/filament circuits.
>
> The answer it that it seems to vary. The Mullard data sheet for the
QY3-125
> (which is basically a 6151/ 4-125, as opposed to 4D21/4-125 - the
> difference is that the 6151 doesn't have the metal base shell)) says that
> RF return connections should go to pin 1. The QY4-400 ( a 4-400) has no
> restrictions, although it's basically the same sort of device. The
> QY4-250/6152 also suggests returns to pin 1 on early data sheets.
>
> The Philips version of the QY4-250 (QB3.5/750) says nothing about filament
> returns but says that both screen grid pins should be used to equalise the
> currents.
>
> With both QY4-250 and 4-250A's, I have resistors in both sides. They have
> series caps (old fashioned molded mica) of 0.01mFd so that I don't heat
the
> resistors with filament current.
>
> I guess this probably doesn't help too much - it seems it's 'pays your
> money and takes your choice' matter.
>
> 73
>
> Peter G3RZP
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|