Amps
[Top] [All Lists]

Re: [Amps] Which Vg2 for 4CX1500B SSB ?

To: peter@pmvandaalen.demon.nl, amps@contesting.com
Subject: Re: [Amps] Which Vg2 for 4CX1500B SSB ?
From: Radio WC6W <wc6w@juno.com>
Date: Sun, 25 Jul 2004 06:57:16 -0700
List-post: <mailto:amps@contesting.com>
On Sat, 24 Jul 2004 23:42:42 +0200 "Peter van Daalen"
<peter@pmvandaalen.demon.nl> writes:
> Hi all, I am new to this list and need some help.

Hi Peter,
   Welcome to the group!

> In various ( linear SSB ) 4CX 1500B PA designs I have seen various Vg2
> voltages from + 225 V until +300V.

   It may be useful to make it adjustable over that range.

> As far as I could recall, the lower the Vg2 the lower the IM3.

   Generally true.  
 
> What could be the reason for designing a ( SSB linear ) 4CX1500B
circuit
> with  Vg2 at 300 V ?

   Higher Vg2 will allow for higher peak power output.

> End of all, one of the reasons to choose for a 4CX1500B is the relative
low
> IM3.

   Yes!

> What are pro's and con's of such high Vg2 ?

   More peak power capability at slightly higher distortion.

   225 volts is allows for about 900 watts;  250 volts is good for 1400
watts or so.

   In either case, the distortion is lower than 99.9% of the driving
transmitters out there.

> EIMAC's " Care and feeding.. " does not resolve this question for me. 
> Who could ?

   Maybe this group?  :-)  

> 
> Thanks.
> Peter, PE1ECM
> 

73 & Good morning,
   Marv  WC6W







*

________________________________________________________________
The best thing to hit the Internet in years - Juno SpeedBand!
Surf the Web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Amps] Which Vg2 for 4CX1500B SSB ?, Radio WC6W <=