Amps
[Top] [All Lists]

Re: [Amps] qrp-excited amps

To: <kd4e@verizon.net>, <amps@contesting.com>
Subject: Re: [Amps] qrp-excited amps
From: "carl seyersdahl" <carlseye@tampabay.rr.com>
Date: Fri, 14 Jan 2005 19:59:19 -0500
List-post: <mailto:amps@contesting.com>
 The 5763 , in osc. svc. would not give more than a couple watts , so a good
qrp rig should should be able to drive that type amp.!!
   Just an old thought.!!
    carl / kz5ca
----- Original Message ----- 
From: "doc" <kd4e@verizon.net>
To: <amps@contesting.com>
Sent: Friday, January 14, 2005 7:49 PM
Subject: Re: [Amps] qrp-excited amps


> Bill L. Fuqua wrote:
> > I have a 2KW plasma generator that operates on 13.56MHz that has a
> > small circuit board with only one 5763 tube oscillator driving a
> > neutralized 5cx1500.  Why not replace it with a qrp tranceiver.
> >
> > 73
> > Bill wa4lav
>
>
> If I recall correctly those are often converted to mono-band
> amps for use by contesters?
>
>
> -- 
> Thanks! & 73, doc kd4e
> A blessed and joy-filled New Year to all!
>
> West Central Florida  100% Linux.  Suse 9.2
> Hallicrafters, Heathkit, Homebrew, TenTec, Yaesu
> Radio Life: http://www.gospelcom.net/twr/
> Linux-Incompatible hardware is defective!
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>