Amps
[Top] [All Lists]

Re: [Amps] Re: plate chokes

To: "Amps@contesting.com" <Amps@contesting.com>
Subject: Re: [Amps] Re: plate chokes
From: "Will Matney" <craxd1@ezwv.com>
Date: Sat, 29 Jan 2005 12:30:50 -0500
List-post: <mailto:amps@contesting.com>
On Sat, 29 Jan 2005 12:29:57 -0500, Will Matney <craxd1@ezwv.com> wrote:

Roy,

I understand that. An air coil choke for 22 uH is not very big. I think
about 1/2" in diameter and about 2" long when using something like 22
gage wire. The point is that using a core will drop the number of turns
and the size of the choke. Down at 160 meters, it would drop the size a
good bit, or I would think. The 22 uH was given as a starting point to
go backwards  from by showing how much impedance was needed to block the
RF effectively.

Will



On Sat, 29 Jan 2005 11:23:50 -0600, Roy Koeppe <royanjoy@ncn.net> wrote:

Will said:

"On 10 meters at 1 kW, you can get by with using
about 22 to 40 uH which is a pretty small choke when it's on a ferrite
core. (etc.)"

Will,

That's nice, but a 10 meter resonant SOLENOID air core choke is already
a very small physical size and it presents over a meg-ohm effective Z to
the tank circuit and cannot saturate and dissipates almost no power.

73, Roy K6XK/0

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


__________ NOD32 1.880 (20040928) Information __________


This message was checked by NOD32 antivirus system.
http://www.nod32.com








-- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>