Amps
[Top] [All Lists]

RE : [BULK] - [Amps] IC-718 and AL-811: Icom manual misleading,interface

To: "'Steve Katz'" <stevek@jmr.com>,"'Martin J. Morgenbesser'" <W7MJM@arrl.net>, <amps@contesting.com>
Subject: RE : [BULK] - [Amps] IC-718 and AL-811: Icom manual misleading,interface necessary according to Icom technician
From: "hermans" <on4kj@skynet.be>
Date: Fri, 4 Feb 2005 22:11:52 -0000
List-post: <mailto:amps@contesting.com>
Steve, there was a guy named  OHM he probably knows.........even if he
never heard about transistors........300 milli volt quite low indeed.
But aren't that transistor max rates ..........
One can use a 2N3055 .....

Jos 

-----Message d'origine-----
De?: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] De
la part de Steve Katz
Envoyé?: vendredi 4 février 2005 18:54
À?: 'Martin J. Morgenbesser'; amps@contesting.com
Objet?: RE: [BULK] - [Amps] IC-718 and AL-811: Icom manual misleading,
interface necessary according to Icom technician


When I asked how such damage could occur, given the specs in the manual,

the Icom technician told me that the specs as printed in the manual are 
misleading and that the IC-718 send relay can only handle "16 volts OR 2

amps, not both."

::Did you ask him where the 2 amps would come from, if there are no
volts?
Maybe Icom's figured a way to make current flow without any potential,
that
would be really cool.  I could convert my car to run on a zero volt
battery,
as long as it can deliver 1000 amps, I'd be all set. -WB2WIK/6

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>