Amps
[Top] [All Lists]

Re: [Amps] Re: 10dB and propagation

To: "R.Measures" <r@somis.org>
Subject: Re: [Amps] Re: 10dB and propagation
From: David Kirkby <david.kirkby@onetel.net>
Date: Thu, 10 Feb 2005 00:45:45 +0000
List-post: <mailto:amps@contesting.com>
R.Measures wrote:


On Feb 7, 2005, at 7:53 PM, Jim Nowotarski wrote:


How about:
1) the bypass path in the amp had 3dB of loss?


The bypass path had the same loss on days when the free-3db was there and on days when it wasn't. The only variables were propagation and electric-mains potential, which was +/- 2% max (0.17db) .

...


Richard L. Measures, AG6K, 805.386.3734. www.somis.org

Rich,
how about submitting the results as a paper to a peer-reviewed scientific journal? The IEEE Transactions on Antennas and Propagation would be a likely journal.


http://www.ieee.org/portal/index.jsp?pageID=corp_level1&path=pubs/transactions&file=tap2.xml&xsl=generic.xsl

Much better than QST. Someone once told me a typical circuit in QST was "How to build a 12V 1A Power Supply using a 7812 Voltage Regulator."

I'm sure many would be interested to read this if you got it published in a peer reviewed professional journal - not an amateur one.

--
Dr. David Kirkby, G8WRB


Please check out http://www.g8wrb.org/ of if you live in Essex http://www.southminster-branch-line.org.uk/



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>