I should start lifting the HV connection to the bottom of the plate
choke,
then power on to see what happen, a (maybe) tube related problem or a power
supply problem.
best regards
Guillermo - LU8EYW.
Greg S escribió:
> Well, after several years of good service, I have a
> problem. I turned the amp on tonight, and was greeted
> with a "whine" (for lack of better term), and I
> thought (imagined?) I saw a spark from underneath. I
> quickly turned the switch back off, and got calmed
> down. I took her out of the cabinet, and find no
> obvious visual problems, so back on with the inside
> cover, and quickly turn it on and off remotely from
> the breaker box. Still have the noise, and it shows HV
> going up, and PLate current starts to move up as I
> chicken out, and turn power back off. The noise starts
> to subside after power off, and becomes a "click", as
> the HV on the meter goes back to zero. The Click slows
> down in frequency as the HV approaches Zero, also
> bouncing in relation to each click. My thinking is the
> "whine" is just these clicks at a high rate of speed.
> I am not afraid to begin to troubleshoot the old gal,
> but was wondering if anyone had Ideas of "1st thing I
> would check" type of things, given the poor
> description of symptoms above. It does this every time
> I turn it on. I only have it on about 1 second before
> shutting it down again. Sorry this is so long. Thanks
> for the help, and have fun at Field Day!!
> 73- Greg Schippers, KC8HXO
>
>
>
> ____________________________________________________
> Yahoo! Sports
> Rekindle the Rivalries. Sign up for Fantasy Football
> http://football.fantasysports.yahoo.com
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|