Amps
[Top] [All Lists]

Re: [Amps] anode connector??

To: <gdaught6@stanford.edu>, <amps@contesting.com>
Subject: Re: [Amps] anode connector??
From: "Dr. William J. Schmidt, II" <bill@wjschmidt.com>
Reply-to: "Dr. William J. Schmidt, II" <bill@wjschmidt.com>
Date: Mon, 11 Jul 2005 18:35:11 -0500
List-post: <mailto:amps@contesting.com>
What's wrong with using a hose clamp... just put the blocking cap lead under 
the clamp and cinch it down.

Sincerely,

Dr. William J. Schmidt, II  K9HZ
Trustee of the North American QRO - Central Division Club - K9ZC

Email: bill@wjschmidt.com
WebPage: www.wjschmidt.com

"If computers get too powerful, we can organize them into a committee; that 
will do them in."  -- Bradley's Bromide


----- Original Message ----- 
From: <gdaught6@stanford.edu>
To: <amps@contesting.com>
Sent: Monday, July 11, 2005 5:37 PM
Subject: [Amps] anode connector??


> Hi All,
>
> I'm nearing completion of "the conversion from Hell", removing the
> 3CV1500 from an Alpha 70V, and installing a 3CX1200Z7.  I need to
> contact the anode of this tube, which won't accept the usual clip
> sort of arrangement.
>
> I'm very tempted to drill and tap a little hole on the periphery of
> the anode cooler, and bolt the wire on.  I can put it in a position
> which minimizes the distance from the RFC/blocking cap junction to
> the anode.
>
> Can anybody tell me why I shouldn't do this?
>
> John, Rich, Tom, Ian???
>
> 73,
> George T. Daughters, K6GT
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>