Amps
[Top] [All Lists]

Re: [Amps] Conversion Nightmare

To: amps@contesting.com
Subject: Re: [Amps] Conversion Nightmare
From: Ian White G/GM3SEK <gm3sek@ifwtech.co.uk>
Reply-to: Ian White GM3SEK <g3sek@ifwtech.co.uk>
Date: Fri, 5 Aug 2005 11:19:08 +0100
List-post: <mailto:amps@contesting.com>
Peter Chadwick wrote:
>Getting back to something to do with amplifier building, to my mind, 
>one of the abominations of the metric system is the ISO metric thread.
[...]
>One day, I must get around to getting a die to match  my 5/16 left hand 
>Whitworth tap......

For a real nightmare thread, try the one on the older Andrew connectors 
for LDF-5 Heliax. The inner conductor of that cable is hollow, and the 
center pin was screwed in using a self-tapping thread that had both a 
conical taper and a self-tightening variable pitch.

But their cable splice connector was even worse. To be able to screw the 
two center conductors together without having to twist the whole length 
of cable, it needed a copper slug with the above-mentioned thread on one 
end, and a left-handed version on the other!

At some stage their mad genius CNC programmer must have started taking 
his meds - they now use simple push-in 'banana jacks'.



-- 
73 from Ian G/GM3SEK

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>