Amps
[Top] [All Lists]

Re: [Amps] FW: High Voltage cable - fitting into SHV type plugs

To: Larry Carman <lncarman@swbell.net>
Subject: Re: [Amps] FW: High Voltage cable - fitting into SHV type plugs
From: "Kenneth D. Grimm, K4XL" <kgrimm@adelphia.net>
Date: Wed, 26 Oct 2005 16:02:02 -0400
List-post: <mailto:amps@contesting.com>
Larry Carman wrote:

>-----Original Message-----
>From: Larry Carman [mailto:lncarman@swbell.net]
>Sent: Wednesday, October 26, 2005 8:44 AM
>To: R.Measures
>Subject: RE: [Amps] High Voltage cable - fitting into SHV type plugs
>
>
>I noticed that on some of the old Henry plasma units they used automobile
>spark plug wire for HV wire. Not sure if the resistive type plug wires would
>be more of a benefit or not to help suppress spikes.
>
>Larry N5BIP
>
I don't know whether you can still get it or not, but Packard 440 spark 
plug wire was what lots of folks used for the HV lead.  Your friendly 
local hot rod shop should have a roll of it and will cut you off as much 
as you need.

-- 

Ken K4XL
k4xl@arrl.net

*** BoatAnchor Manual Archive ***
On the web at http://bama.sbc.edu and http://bama.edebris.com
FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>