Amps
[Top] [All Lists]

Re: [Amps] schematic software?

To: <amps@contesting.com>
Subject: Re: [Amps] schematic software?
From: "David C. Hallam" <dhallam@rapidsys.com>
Reply-to: dhallam@rapidsys.com
Date: Wed, 2 Nov 2005 15:01:41 -0500
List-post: <mailto:amps@contesting.com>
IMHO I find that ExpressSch is fine if you are working with pc boards and
solid state devices, etc. but if you are including tubes and other
"obsolete" devices in your schematics, it's not so useful.  I still vote for
Visio Technical or AutoCAD for doing schematics.

David
KC2JD

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
Behalf Of Michael Tope
Sent: Tuesday, November 01, 2005 11:29 PM
To: Jim Tonne; craxd1@verizon.net; amps@contesting.com
Subject: Re: [Amps] schematic software?



----- Original Message -----
From: "Jim Tonne" <tonne@comcast.net>
To: <craxd1@verizon.net>; <amps@contesting.com>
Sent: Tuesday, November 01, 2005 3:43 PM
Subject: Re: [Amps] schematic software?


>
> ExpressPCB - the software is designed to design
> PC boards.  Excellent quality of printed output,
> easy to learn, free, etc.
>
> - Jim Tonne
>

Ditto! Been using it at work and at home for schematics for some
time. Just started using the PWB layout last week. Almost done
with my first board. Great program.

Mike, W4EF................


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>