[Top] [All Lists]

Re: [Amps] FC-30 Choke

To: Phil Clements <>,"'AA6DX - Mark'" <>,
Subject: Re: [Amps] FC-30 Choke
From: "Carcia, Francis A HS" <>
Date: Mon, 5 Dec 2005 07:58:08 -0500
List-post: <>
Well My 4-1000A Linear works fine on 160 with a FC30. Pi network input
circuit. gfz 

-----Original Message-----
From: [] On
Behalf Of Phil Clements
Sent: Friday, December 02, 2005 7:41 PM
To: 'AA6DX - Mark';
Subject: Re: [Amps] FC-30 Choke

The B&W FC series of chokes were all 3-30 mhz continuous coverage.
The ferrite rods were only 3.5 inches long; too short to get the proper
turns of wire on the rod to properly cover 160m. That's why they rated it
3-30 mhz instead of 1.8-30 mhz. 

Phil Clements, K5PC

> METHINKS, only thinks, that the "A" version incorporated 15M, which the
> older one without did not ... as there was no 15M band at time it was
> manufactured ...   that right, gang? --- Mark  AA6DX

Amps mailing list
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>