Amps
[Top] [All Lists]

Re: [Amps] A question - Clipperton L

To: "Doug Renwick" <ve5ra@sasktel.net>, <amps@contesting.com>
Subject: Re: [Amps] A question - Clipperton L
From: "k7rdx" <k7rdx@charter.net>
Date: Thu, 16 Feb 2006 19:59:53 -0800
List-post: <mailto:amps@contesting.com>
Wasn`t the FL-1 a band pass/band reject filter to limit operation  below 10
meters? If I remember correctly you have to delete this filter when adding
10 meters to this amp. Jim K7RDX
----- Original Message ----- 
From: "Doug Renwick" <ve5ra@sasktel.net>
To: <amps@contesting.com>
Sent: Thursday, February 16, 2006 6:57 PM
Subject: Re: [Amps] A question - Clipperton L


> My notes say:
> Dentron offered a relay switched tuned input for later Ls or a kit.
> Omega Electronics tuned input board can be and has been used.
> I do not have a drawing of FL-1, but it appears to consist of 3
> switched toroids.
>
> Doug/VA5DX
>
>
> The old Dentron Clipperton L did not have tuned input
> circuits as far as now, but there have been a few on eBay
> saying that they have. As I know it, only the Dentron
> Clipperton QRO had tuned input circuits.
>
> When looking at the circuit diagram for a Clipperton L
> there is "an impedance matching circuit" called FI 1 -
> but one can not see what's in there, anyone who knows?
>
> 73 de Osten SM5DQC    sm5dqc@areteadsl.se
>
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 267.15.6/258 - Release Date:
> 2/13/2006
>
>
>


----------------------------------------------------------------------------
----


> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>