| To: | Barrie Smith <barrie@centric.net>, amps@contesting.com,Bill Turner <dezrat@copper.net> |
|---|---|
| Subject: | Re: [Amps] Transformers in series |
| From: | Peter Chadwick <g3rzp@g3rzp.wanadoo.co.uk> |
| Reply-to: | g3rzp@g3rzp.wanadoo.co.uk |
| Date: | Sun, 12 Mar 2006 22:55:41 +0100 (CET) |
| List-post: | <mailto:amps@contesting.com> |
If you have a spare set of contacts, consider using them to open across a series resistor. This works best on DC, where you can have a nice big capacitor charged up to cause closure of the relay, and then have a series resistor that is switched in once the relay has closed, and the current requirement has dropped.. This may not be practical in this case, but could be worth considering. 73 Peter G3RZP _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Transformers in series, Bill Turner |
|---|---|
| Next by Date: | Re: [Amps] Transformers in series, Theo Bellamy |
| Previous by Thread: | Re: [Amps] Transformers in series, Jim Kearman |
| Next by Thread: | [Amps] RF probe and SSB (may be a little OT), Bob |
| Indexes: | [Date] [Thread] [Top] [All Lists] |