Amps
[Top] [All Lists]

Re: [Amps] TL922A

To: "Dan Hearn" <dhearn@wwnw.net>, "amps" <amps@contesting.com>
Subject: Re: [Amps] TL922A
From: "Marc Wullaert" <marc.wullaert3@pandora.be>
Date: Mon, 3 Apr 2006 06:48:02 -0000
List-post: <mailto:amps@contesting.com>
1200-1300watts  output seems to me that the amp and tubes are in a
goodshape.

on4ma   ( OT4T vanity callsign )

----- Original Message -----
From: "Dan Hearn" <dhearn@wwnw.net>
To: "amps" <amps@contesting.com>
Sent: Sunday, April 02, 2006 7:16 PM
Subject: [Amps] TL922A


> Thanks to all who responded to my question about the resistor in the
> parasitic suppressors for this amp. I was able to look into one of the
amps
> and found 2ea 47 ohm 1 watt resistors in parallel inside each of the
> parasitic chokes. Close inspection of the soldering leads me to believe
they
> are the original factory jobs and not replacements. I was not at liberty
to
> unsolder them to check their value but they appear to not have been
> overheated and the amp is stable. The tubes are rather old and max output
is
> about 1200-1300 watts.
>   I don't believe there is room inside the chokes for two 2watt resistors
in
> parallel. I think the 2 parallel 1 watt resistors might run cooler than a
> single 2 watt job in this spot.
> 73, Dan, N5AR
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>



-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.3.4/299 - Release Date: 31/03/2006

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>