I would like to add the things will work reasonably okay if you use a single
socket, dedicated 15 or 20 amp 110-120 v outlet to connect the amplifier to
your house mains.
Gary... wa6fgi
----- Original Message -----
From: "Jeff Strailey" <liveccam@yahoo.com>
To: <Amps@contesting.com>
Sent: Monday, May 29, 2006 3:45 PM
Subject: [Amps] LK500 various
Thanks to everyone who replied privately and to the group. The soft start
module in my LK500ZB doesn't resemble the Harbach module in any way. There
were also other wiring changes that defy common sense like bringing the AC
directly to the power switch and then the line fuses rather than the
opposite which one would expect. Me thinks I'm gonna deep six the mystery
soft start module and return the AC input path to factory configuration.
Next step will be to buy the Harbach board and appropriate resistors for 120
volt operation. My ears aren't deaf to those who said 220v only for the amp
but it just isn't practical in this shack. I will very seldom use the
amplifier, and every last watt isn't really that important. Again many
thanks to the members who've attemted to help me with this problem
73,
Jeff K6TLA
---------------------------------
Blab-away for as little as 1¢/min. Make PC-to-Phone Calls using Yahoo!
Messenger with Voice.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|