Amps
[Top] [All Lists]

Re: [Amps] GS-35B on 6 meters

To: amps@contesting.com
Subject: Re: [Amps] GS-35B on 6 meters
From: Tony King - W4ZT <amps071806@w4zt.com>
Date: Sun, 06 Aug 2006 15:41:04 -0400
List-post: <mailto:amps@contesting.com>
Actually it would be impossible to put a lug between the cooler and the 
anode of the GS-35B.  The cooler has a precision machined taper that 
fits the top SIDES of the anode. There is no physical connection between 
the cooler and the top of the anode.  The inside top of the anode is a 
larger hole with a flange which a large flat washer fits and which the 
anode threaded stud goes through. Above that there is another smaller 
flat washer and a split lock washer. Then the round threaded nut pulls 
all that down against the cooler's flange bringing the SIDE taper into 
solid contact with the side of the anode. Since the large round threaded 
nut on top is threaded all the way through, it is possible to put a 
metric screw (m10 x 12mm)into the top of the threads.  As Kim pointed 
out to me in a private email, it really isn't a good idea to have the 
hot air from the anode exit and blow onto the tank because of the 
thermal instability that it can cause and will be particularly 
noticeable on six meters and above.

73, Tony W4ZT


Ian White GM3SEK wrote:
>> ORIGINAL MESSAGE:
>>
>> On Sat, 5 Aug 2006 08:27:35 +0100, Ian wrote:
>>
>>
>>> People do that... but just because you can remove the anode cooler of a
>>> GS35/31 or GI-7, that doesn't make it a good idea.
>> ------------ REPLY SEPARATOR ------------
>>
>> You misunderstand.
>>
>> I ddin't remove the fins at all, only the bolt that holds them in
>> place. The cooling is not affected by the presence or absence of the
>> bolt; its only function is to secure the fins. When I put the lug
>> under the bolt and retightened it, things are just as they were
>> before. There is almost no heat flow through the bolt itself.
> 
> Apologies, Bill. I see what you mean now.
> 
> The potential problem is only when a strap or a plate line is sandwiched 
> *between* the tube and the cooler
> 
> 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>