Amps
[Top] [All Lists]

Re: [Amps] grid resonance

To: "Tom W8JI" <w8ji@w8ji.com>
Subject: Re: [Amps] grid resonance
From: R L Measures <r@somis.org>
Date: Tue, 8 Aug 2006 05:46:15 -0700
List-post: <mailto:amps@contesting.com>
On Aug 7, 2006, at 1:42 PM, Tom W8JI wrote:

>> Now here is the biggie that caused this thread....is the
>> grid on a 3-500Z
>> physically large enough to fall into "significant
>> electromagnetic
>> interaction" category, or is it in the "hard-wired"
>> category, or none of the
>> above?
>
> Of course it is large enough to have resonances at
> frequencies we might be interested in. We not only have to
> contend with lead lengths there is also considerable
> capacitance, both distributed and lumped at points (like
> that big grid support cone).

When the grid is grounded, isn't the grid support cone grounded, Tom?
>
> Assuming the grid has some sort of problem based on a GDO
> meter dip is as bad as ... ...

Ignoring a resonance is good engineering practice?
>
> Anyway here's a sweep of 3-500Z's and 811A's.
>
> http://www.w8ji.com/grid_resonance.htm

So the 3-500Z has a grid resonance at 95MHz.  Curiously, this happens  
to be the frequency of the intermittent parasitic oscillation in the  
Henry 2K-4A.
>
> If you want to see tank voltage distribution in an
> SB220/221:

I thought we were talking about grid resonance.
>
> http://www.w8ji.com/SB221/sb-221.htm
>
> 73 Tom
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>

R L MEASURES, AG6K. 805-386-3734
r@somis.org



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>