Amps
[Top] [All Lists]

[Amps] FS: Brim Electronics High Voltage Feedthroughs

To: amps@contesting.com
Subject: [Amps] FS: Brim Electronics High Voltage Feedthroughs
From: "David Goncalves" <davegoncalves@gmail.com>
Date: Tue, 23 Jan 2007 18:08:48 -0500
List-post: <mailto:amps@contesting.com>
Hello Folks,

I have purchased a lot of 10 Brim Electronics 6-77 Feedthru Insulators
(minimum order). I now have 4 surplus to my needs. I am offering these
on eBay starting 'at cost' ($12.75), plus shipping from Danvers, MA
(UPS, FedEx, USPS OK).

These are NEWLY MANUFACTURED UNITS - NO MISMATCHED JUNKBOX CRUD. No
cracks, chips, or 'glue'. These beefy 3 1/2" long, 1 1/2" diameter
parts are truly built for the job. They are perfect for replacing
transformer feedthroughs, coil standoffs, antenna feedthroughs, or as
the base for a Jacob's Ladder.

Each Feedthru Includes:

              (1) 5" Long nickel plated brass rod, 1/4-20 thread
              (4) 1/4-20 nickel plated brass nuts
              (4) washers
              (1) Porcelain Feedthru Set (6-76 Upper Section, 6-77-B
Bottom Section)
              (2) Cork Washers

Please see:

http://cgi.ebay.com/Large-HV-Porcelain-Feedthru-Insulator-NEW_W0QQitemZ200071665372QQihZ010QQcategoryZ1502QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Or search for "Large HV Porcelain Feedthru Insulator"

$12.75 plus shipping is the starting bid - this is AT COST - I am just
trying to make back at least what I paid.

Yes, these are expensive when compared to stuff you can get surplus -
but sometimes you can't find what you need at a hamfest, and you can't
forget the cost of gas and food...


David Goncalves
W1EUJ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] FS: Brim Electronics High Voltage Feedthroughs, David Goncalves <=