[Top] [All Lists]

Re: [Amps] AL-811H maximum Ip

Subject: Re: [Amps] AL-811H maximum Ip
From: Steve Katz <>
Date: Wed, 22 Aug 2007 08:43:05 -0700
List-post: <>
811As *4 shouldn't pin the Ip meter.  640mA is typical operation max, 800mA
is absolute max. -WB2WIK/6

-----Original Message-----
From: Jan Ditzian [] 
Sent: Wednesday, August 22, 2007 8:54 AM
Subject: [Amps] AL-811H maximum Ip

I have an AL-811H, and I would like to know the maximum plate power, Ip, 
when tuning this radio.  I am not using a pulser.  The instructions 
mention a limit for the grid current, and then tell me to peak the 
output.  However, I find that if I do this, I pin the Ip meter while not 
quite reaching the grid current limit.

Thank you,

Jan, KX2A

Amps mailing list
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>