[Top] [All Lists]

[Amps] temperature

Subject: [Amps] temperature
Date: Mon, 27 Aug 2007 17:27:57 EDT
List-post: <>
I purchased a used HF amp with a 4-1000A but no blower.  To verify  that the 
blower I have is adequate I would like to measure seal  temperatures.  I 
believe that this can be done using Tempilaq.  How  successful is doing that?  
maximum seal temperatures are 150C for the  base and 200C for the plate.  To 
be conservative, I expect to use tempilaq  laquer values well below those 
temperatures.  What values of temperature do  you usually experience with an 
adequate blower?  If you have the model of  such a blower that would be helpful 
 Thanks.  Bob W7LR

************************************** Get a sneak peek of the all-new AOL at
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] temperature, W7lr <=