-bills stuff
1. True – but avoid too many turns on the slug (CW, I believe) that can
take it all the way out of the form since the access is problematic for
getting it back in.
2. Radio Shack 3-Piece Anti-Static Set , Catalog # 64-2230 has one.
You might be interested in a recent eham article:
“Ameritron AL-811H Tuning” at http://www.eham.net/articles/18364
Bill, N6MW
> Hi-
>
> Have read with interest the reflector for quite a while---most things
> way
> over my head, but I glean as much knowledge as possible.
>
>
> My new 811 has a high SWR between the 857d and the 811, only on 17
> meters,
> forcing the 857d to fold back.. Ameritron wrote back and said I needed
> to
> adjust the Input slug with a 1/10 inch hex tv alignment tool to tune
> the
> input slug from the back of the amplifier for a lower swr to the
> transceiver.
>
>
> 1 Do you guys agree?
>
> 2 where do I get a 1/10 hex tv alignment tool?
>
>
> Thanks for accepting a q from a newbie...
>
>
>
>
> Kelly
>
> K8MCN
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|