keep us posted as to the results
Gary...wa6fgi
(qth is not too far from Dunnigan ,Ca)
----- Original Message -----
From: "Kevin LaHaie" <klahaie@centricata.com>
To: <amps@contesting.com>
Sent: Tuesday, August 05, 2008 10:55 AM
Subject: Re: [Amps] Burning in an 8877
> Follow Up on the 8877 testing / burn in thread
>
> I received a return phone call from Manuel at Zonum Industries
> (www.zonumindustries.com)
>
> They perform complete testing of the 8877 for $50, plus return freight
> if there is anything of value to return. Takes about a week after they
> receive them.
>
> That's what I will probably do with the 2 8877's I was given before
> embarking on an amplifier project built around them. Now, if I had an
> amplifier that used the tube, I might be inclined to use that instead,
> but I don't and want to know the condition of the pair I have.
>
> 73 Kevin K7ZS
>
>
> TexasRF@aol.com wrote:
>> There was extensive coverage of this exact subject within the past two
>> weeks. You might want to check the archives for some excellent advice.
>>
>> 73/k5gw
>>
>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|