Amps
[Top] [All Lists]

Re: [Amps] 8877 Socket

To: "" <amps@contesting.com>
Subject: Re: [Amps] 8877 Socket
From: Mike Manship <mjmanship@iquest.net>
Date: Sun, 14 Sep 2008 14:08:28 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I see sockets here too :

http://wa8wzg.net/forsale.htm

73 de Mike W9OJ

> Tom:
> What you are seeing on Ebay is the Johnson 247 socket which is part of the
> Eimac SK-2210 air socket system. The 247 base typically sells in the $30
> range.
>
> However, if you are building an amp using the 8877, you need the grid contact
> clips which are very hard to find and quite expensive. Also, if you do not
> use the SK-2210, you will have to make a suitable system using metal
> standoffs to put the socket below the chassis. You can build your own but it
> is a heck of a lot of work (I've done it). It is far easier to buy a used or
> new SK-2210 socket system.
>
> RF parts sells a new SK-2210 for $95. See the link to their catalog below:
>
> http://www.rfparts.com/sockets.html
>
> Some times you can find these sockets, or similar ones, on the used or
> surplus market where they sell for $30 to $35.
>
> 73, Dennis W0JX/8
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>