Amps
[Top] [All Lists]

Re: [Amps] filament voltage dropping??

To: <amps@contesting.com>, <mikflathead@aol.com>
Subject: Re: [Amps] filament voltage dropping??
From: "Bob Maser" <bmaser@tampabay.rr.com>
Date: Sun, 11 Jan 2009 23:23:32 -0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>
It's all about watts.

Bob W6TR
----- Original Message ----- 
From: <mikflathead@aol.com>
To: <amps@contesting.com>
Sent: Sunday, January 11, 2009 11:13 PM
Subject: [Amps] filament voltage dropping??


> Are there any advantages to dropping on the primary side or the secondary 
> side ? This is on a K2RIW style amp for 432 mhz. The tubes are a pair of 
> 8930s. I need to go from 6.3 to 5.5 or so. Mike
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>