kg7hf@comcast.net wrote:
> I believe Hsu is correct, the 3cx1500D7 is "designed" to replace two
> 3-500z's. Not
Make that a 3CX-1200 <:-))
73
Roger (K8RI)
> quite a direct replacement, but close. Airflow is still going to be an
> issue to address, but at least power requirements are similar.
>
> 73,
> Paul, KG7HF
>
>
>> Message: 2
>> Date: Wed, 21 Jan 2009 18:08:40 +0100
>> From: "Fortra"
>> Subject: Re: [Amps] 3-500zs to 8877
>> To: "Hsu" , "Val Erwin"
>> Cc: amps@contesting.com
>> Message-ID: <001e01c97bea$e95d2850$0b02a8c0@fortra5ae8e7d7>
>> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>> reply-type=original
>>
>> Hsu,
>> you have probably thought about 3CX1200D7.
>> That tube has the sane socket as 3-500Z.
>>
>> Nermin S58DX
>> ----- Original Message -----
>> From: "Hsu"
>> To: "Val Erwin"
>> Cc:
>> Sent: Wednesday, January 21, 2009 4:32 PM
>> Subject: Re: [Amps] 3-500zs to 8877
>>
>>
>>
>>> 3CX1500D7 is better,
>>> It use same socket as 3-500Z.
>>> Hsu
>>> ----- Original Message -----
>>> From: "Val Erwin"
>>> To: ; "Donald Fox"
>>> Sent: Wednesday, January 21, 2009 11:23 PM
>>> Subject: Re: [Amps] 3-500zs to 8877
>>>
>>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|