I havent seen many motor caps that are 12-18" high. Those are fine for
the low value 1-4 uF, 1-2KV stubbies.
Carl
KM1H
----- Original Message -----
From: "Paul Kraemer" <elespe@lisco.com>
To: <ve3zi@rac.ca>; "Amps" <amps@contesting.com>
Sent: Thursday, March 19, 2009 9:26 PM
Subject: Re: [Amps] Clips for oil-filled capacitors
> They are fairly common with places that sell motor start and motor run
> capacitors
> Paul K0UYA
> ----- Original Message -----
> From: "Roger Parsons" <ve3zi@yahoo.com>
> To: "Amps" <amps@contesting.com>
> Sent: Thursday, March 19, 2009 6:50 PM
> Subject: [Amps] Clips for oil-filled capacitors
>
>
>>
>> After looking at the nice pictures of YC156 amplifiers, my mind
>> wandered
>> to the large oil-filled capacitors. The capacitors themselves are
>> easy
>> enough to get, but does anyone know of a source for the mounting
>> clips?
>> (The ones that clip over the top edge of the capacitor and are bolted
>> to
>> the chassis at the bottom.)
>>
>> Thanks
>>
>> Roger
>> VE3ZI
>>
>>
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|