Amps
[Top] [All Lists]

Re: [Amps] Silver plating

To: <dezrat1242@yahoo.com>, "'Ham_Amplifiers Reflector'" <ham_amplifiers@yahoogroups.com>, "'RF Amps reflector'" <rfamplifiers@yahoogroups.com>, "'Amps reflector'" <amps@contesting.com>
Subject: Re: [Amps] Silver plating
From: "Alex Eban" <alexeban@gmail.com>
Date: Fri, 10 Apr 2009 09:56:50 +0300
List-post: <amps@contesting.com">mailto:amps@contesting.com>
...usually they do it for esthetic purposes. Ah HF at least, the skin effect
occurs at depths greater than the plating, so that a sizeable amount of
current still flows in the copper underneath. Not that it doesn't do
anything, but apart from keeping tarnish away, it doesn't do much, unless
it's very much thicker than you're likely to find in a commercial product.
It would be much different in a VHF amplifier.
73 and all the best:
Alex    4Z5KS

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Bill, W6WRT
Sent: Thursday, April 09, 2009 5:38 AM
To: Ham_Amplifiers Reflector; RF Amps reflector; Amps reflector
Subject: [Amps] Silver plating

Does anyone here have any before and after comparisons of silver
plating HF tank coils? It seems most of the commercial amateur amp
makers do it but I have never seen any specific data. All comments
appreciated.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.0.238 / Virus Database: 270.11.50/2051 - Release Date: 04/09/09
19:01:00

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>