An interesting version of the same tube is the 4CN15. It is the same with out
the radiator fins.
I have gotten some of these from what appeared to be a 4 tube HF amplifier that
was oil cooled.
The amplifier was all in oil and little sets of fins were clamped to the tubes.
Stuff like this was often used in high altitude air craft due to the fact
that at high altitudes
the air was not only thinner but the break down voltage is much lower.
Also I had gotten some 4CN15 tubes where the socket tabs were directly
soldered.
I don't know what they came from because I got them on ebay and the wires were
clipped off. So apparently if you use soft solder, lead-tin, you can solder to
the tabs
with out breaking the vacuum seal.
73
Bill wa4lav
________________________________________
From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf Of
david sutton [sootydave@yahoo.com]
Sent: Thursday, July 23, 2009 8:46 PM
To: Amps@contesting.com
Subject: [Amps] EIMAC 4CX300A 8167
Hi Group.
Can any one tell me if it would be worth building amp using this tube?
EIMAC 4CX300A 8167
many thanks and 73's
Dave
kg4uxr
Brits with a southern call? how strange, only when you hear the accent.
see kg4uxr on :-
www.qrz.com/callsign/kg4uxr
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|