Amps
[Top] [All Lists]

Re: [Amps] AL 80B

To: "Phil LaMarche" <plamarc1@verizon.net>, <amps@contesting.com>
Subject: Re: [Amps] AL 80B
From: "Steve Katz" <stevek@jmr.com>
Date: Sun, 25 Oct 2009 16:44:34 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Well, if there's no high voltage, obviously there's a problem and the amp can't 
produce any output power (without high voltage!).
 
Is this a "new" amp or a "used" one?
 
Do you feel comfortable working on high voltage circuits?  This obviously takes 
a lot of precautions, and some specialized equipment.
 
If so, first thing I'd determine is if the HV metering circuit is shot or if 
there's really no high voltage.  HV being "absent" and no fuses blown would 
indicate to me that something's "open" (rather than shorted).  I'd have no 
problem looking for that, but then I've worked on HV stuff all my life.  If 
you're uncomfortable with that and aren't well aware of all the precautions 
that need to be taken, you need help from a local amp guy or the factory.
 
WB2WIK/6

________________________________

From: Phil LaMarche [mailto:plamarc1@verizon.net]
Sent: Sun 10/25/2009 2:33 PM
To: Steve Katz
Subject: RE: [Amps] AL 80B


Amp had HV when hooked up.  K3 is driving it.  No grid or power. Checked HV 
again and it was gone.  Fuses OK.  Very strange.
 

Philip LaMarche 
LaMarche Enterprises, Inc.
www.instantgourmetspices.com <http://www.instantgourmetspices.com/> 

www.w9dvm.com <http://www.w9dvm.com/>  
800-395-7795 pin 02 
727-944-3226 
FAX 727-937-8834 
NASFT 30210 

K3  #1605

CCA 98  00827
CRA 1701

W9DVM 


 

________________________________

From: Steve Katz [mailto:stevek@jmr.com] 
Sent: Sunday, October 25, 2009 5:27 PM
To: Phil LaMarche; amps@contesting.com
Subject: RE: [Amps] AL 80B


Phil, what are you driving it with?  How much drive power and what mode?
 
When you drive it does it indicate any grid current?  Plate current?  What's 
the high voltage meter indicate?
 
WB2WIK/6

________________________________

From: amps-bounces@contesting.com on behalf of Phil LaMarche
Sent: Sun 10/25/2009 11:40 AM
To: amps@contesting.com
Subject: [Amps] AL 80B



Just received this amp and wondering if ALC must be hooked up as asked in
the manual.  I haven't used ALC in years.  When I key the Amp, I'm not
getting any power out.  Relay is closing.  Any one help?

Phil


Philip LaMarche
LaMarche Enterprises, Inc.
 <http://www.instantgourmetspices.com/> www.instantgourmetspices.com

www.w9dvm.com <http://www.w9dvm.com/> 
800-395-7795 pin 02
727-944-3226
FAX 727-937-8834
NASFT 30210

K3  #1605

CCA 98  00827
CRA 1701

W9DVM



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>