I wouldnt trust RG-8 as the jacket will eventually pollute the dielectric.
Thats why RG-213 was developed and Ive seen that used at 20KV in industrial
applications. Ive used it at 6KV with mil spec N connectors and never lost a
HV fuse.
Carl
KM1H
----- Original Message -----
From: "Ron Youvan" <ka4inm@tampabay.rr.com>
To: "amps" <amps@contesting.com>
Sent: Wednesday, December 02, 2009 4:58 PM
Subject: Re: [Amps] High Voltage wire
>> 1900V if I remember but it has been used at over 3000V without breakdown.
>
>>> I think that RG-58 has 4000+ volt plus insulation.
>
> Ordinary RG-8/U is rated at something like 5,000 volts, but my hi-potter
> uses it as
> it's negative lead and it with stands (with no leakage, compared to the
> corona) about
> 55,000 Volts, I'm guessing as the meter only goes to 50 kV. Additional
> coax is the same.
> --
> Ron KA4INM - I'm proud to be Chuck's pop!
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|